Find 3m Pallet Stacker, Hydraulic Pallet Stacker, Full Electric Pallet Stacker on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Fireproof Steel Door > 3m height walking full electric hydraulic pallet stacker
3m height walking full electric hydraulic pallet stacker
  • 3m height walking full electric hydraulic pallet stacker
  • 3m height walking full electric hydraulic pallet stacker
  • 3m height walking full electric hydraulic pallet stacker
  • 3m height walking full electric hydraulic pallet stacker

3m height walking full electric hydraulic pallet stacker

Payment Type: T/T,Paypal,Western Union
Terms of Trade: FOB,CFR,CIF,FCA
Min. Order: 1 Set/Sets
Delivery Time: 7 Days

Product Description

3m electric forklift is a dual-purpose full electric pallet stacker that operate on electricity, and most work on batteries. Electric forklift truck its function is to store limited electric energy and use it in a suitable place. It works by converting chemical energy into electrical energy. Portable lifting electric forklift has a wide rotating radius and is widely used in warehousing, logistics, handling, and other places. Electric pallet truck is more suitable for sites with fireproof and explosion-proof requirements (such as printing workshops, oil depots, docks, warehouses, etc.). When the battery is being placed, the electrolyte can flood the plate and leave a little space. If the battery is placed horizontally, some of the electrode plates will be exposed to the air, which is very unfavorable to the battery plate, and the general battery observation hole or The top of the battery has an exhaust port that communicates with the outside world, so the electrolyte is easy to flow out across the battery.

The advantage of 1ton 3m full electric hydraulic forklift:

1. Separately excited motor, strong climbing ability.

2. High strength forks.

3. Built-in charger.

4. Automatic lifting limit, motor and battery life extension.

5. Stepless control system, safe and quite.

6. Controller with multiple automic protection. Emergency reversing device

Technical data of 3m hydraulic electric forklift:

Model Lifting height 1600mm Lifting height 2000mm Lifting height 2500mm Lifting height 3000mm Lifting height 3500mm
Whole machine height 2080mm 1600mm 1850mm 2150mm 2350mm
whole machine length 1900mm 1900mm 1900mm 1900mm 1900mm
Lifting height 1600mm 2000mm 2500mm 3000mm 3500mm
Fork lowest height 90mm 90mm 90mm 90mm 90mm
Max.Fork adjustment range 680mm 680mm 680mm 680mm 680mm
Fork length 1000mm 1000mm 1000mm 1000mm 1000mm
Min.Turning radius 1800mm 1800mm 1800mm 1800mm 1800mm
Load center distance 500-600mm 500-600mm 500-600mm 500-600mm 500-600mm
Front wheel diameter 80mm 80mm 80mm 80mm 80mm
Rear auxiliary wheel diameter 125mm 125mm 125mm 125mm 125mm
Driving wheel diameter 250mm 250mm 250mm 250mm 250mm
Battery voltage 24V/150Ah 24V/150Ah 24V/150Ah 24V/150Ah 24V/150Ah
Lifting motor power 2.2KW 2.2KW 2.2KW 2.2KW 2.2KW
Machine length +500mm(pedal) 1900mm 1900mm 1900mm 1900mm 1900mm
Whole machine width 860mm 860mm 860mm 860mm 860mm
Fork out width 680mm 680mm 680mm 680mm 680mm
Door frame material C type steel C type steel C type steel C type steel C type steel

pallet stackerpallet stacker

pallet stackerpallet stacker

Maintance of 3m height walking full electric hydraulic pallet stacker:
1. Lift the wheels when you first test the car, so that even if there is a connection error, there is no danger.
2. When charging the battery, the charging circuit must be completely disconnected from the chopper, because in addition to affecting the charging of the charger, the overvoltage generated by the charger can damage the chopper.
3. Pay special attention to the wiring of the battery to the electronic control should be arranged in parallel and should be as short as possible.
4. When the vehicle is working in a place with poor working conditions and difficult ventilation, it is recommended to apply forced ventilation to the controller.
5. Do not decelerate when turning, drive when the load is increased, the truck is overloaded, and drive on a sloping, soft ground. The driver should try to avoid these unsafe operations during operation.
6. Regularly clean the internal dust of the DC motor and check the carbon brush and spring.
7, the battery should always add distilled water (pure water).
8. If the electric forklift is not used for a long time, the battery should be fully charged. And keep charging at a frequency of about 1~2 months.

Our hydraulic full electric forklift is also widely applied to transport components in the factory workshop ,especially suitable for printing and dyeing,papermaking.It is one kind of civilized production tools.Special size for length and width can be made according to customer's requirements. Semi electric pallet stacker is very popular in South America, Southeast Asia, Middle East, Middle Asia etc. If any enquiry, pls contact me freely.

Shandong Hengwang Group Co., Ltd

  Shandong Hengwang Group is a science and industry integration enterprise which is located in the Jining city of Shandong Province-the hometown of Confucius and Mencius and the birthplace of Confucianism. Founded in 2011 with a registered capital of 50 million, Our company owns six wholly-owned subsidiaries which have 400 employees. Since its inception, relying on its strong scientific and technological strength, highly skilled management personnel, strict testing methods and exquisite division of labor and production, Shandong Hengwang Group dedicated to producing, research and development and sales of drilling equipment, construction machinery, and mining machinery.

Company Info
  • Company Name: Shandong Hengwang Group Co., Ltd
  • Representative: Mingtao Liu
  • Product/Service: Water well drilling rig , Pile Driver , DTH Drilling Rig , Bulldozer , Motor Grader , Wheel Loader
  • Capital (Million US $): 50,000,000RMB
  • Year Established: 2002
  • Total Annual Sales Volume (Million US $): Above US$100 Million
  • Export Percentage: 71% - 80%
  • Total Annual Purchase Volume (Million US $): Above US$100 Million
  • No. of Production Lines: Above 5
  • No. of R&D Staff: 21 -30 People
  • No. of QC Staff: 21 -30 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 10,000-30,000 square meters
  • Factory Location: Hengwang Science Park, Taibaihu New District, Jining City, Shandong Province, China (Mainland)
  • Contact Person: Ms. Maggie Wang
  • Tel: 86-021-58321600
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters